Pump + Controller Bundle

As low as $749.00

In stock

SKU

PUMP-BUNDLE

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Customize Pump + Controller Bundle

Choose a Pump

Quantity

Add a Controller and Cables

1 x Pre-Installed Controller and Cable Kit + $120.00

Add a Valve

1 x 8 Position Distribution Valve + $629.00

* Required Fields

Your Customization

Pump + Controller Bundle

In stock

Qty

$749.00

Summary

Details

Discounted product bundle with your choice of 5 mL, 10 mL, or 20 mL pump with pre-installed pump controller and optional 8 position distribution valve.

Pump Specifications

Pump Capacity	5 mL	10 mL	20 mL
Stroke Length	30 mm	24.08 mm	24.88 mm
Time for full stroke move	6 s – 1765 s	4.8 s – 1416 s	5 s – 1464 s
Resolution	0.4154 μL	1.0381 μL	2.0096 μL
Syringe inner diameter	14.55 mm	23 mm	32 mm
Linear speed	0.02 mm/s – 5 mm/s
Accuracy	≤1% @ full stroke
Repeatability	2‰ - 5‰ @ full stroke
Pressure rating (air)	0 – 1.0 Mpa
Pressure rating (water)	0 – 1.2 Mpa
Service life	3 million pump cycles without leakage (pumping water)
Initial position detection	Optocoupler
Actuator	Ball screw (lead 1 mm)
Fluid path	Borosilicate glass cylinder, PTFE piston/plunger, PTFE outlet
Maximum pressure	Positive air pressure 0 – 1.0 Mpa / Negative air pressure 0 – 0.05 Mpa
Connection	1/4-28UNF Female
Dimension (L × W × H)	47.5 mm × 42 mm × 191 mm
Power requirement	24 VDC / 1.5 A
Working temperature	5℃ – 55℃
Working humidity	< 80% relative humidity, non-condensing
Net weight	0.72 kg

Valve Specifications

Value type	1 to 8 fluidic valve, center common
Channel diameter	13 mm
Pressure rating (air)	0 – 1.0 Mpa
Pressure rating (water)	0 – 1.2 Mpa
Fluid path	Ceramic valve surfaces, PTFE ports
Connection	1/4-28UNF Female
Dimension (L × W × H)	50 mm × 50 mm × 191 mm
Power requirement	24 VDC / 1.5 A
Working temperature	5℃ – 55℃
Working humidity	< 80% relative humidity, non-condensing
Net weight	1 kg

Controller Specifications

Interface	USB (USB-C connector, cable included)
Power	24 VDC, 5 A (Power supply included)
Windows Driver	No custom driver required
High Level Commands	Get Firmware Version Initialize Refill Aspirate (specify volume) Dispense (specify volume) Get Remaining Volume
Low Level Commands	Move to Position Get Motor Status Stop Move Await Move Completion Move Relative (specify steps) Move Absolute (specify steps) Set Speed Set Acceleration Set Motor Current (25%, 50%, 75%, 100%)
Software	A Windows program is included to exercise the pump Customizations to firmware and software are available